There are many types of insulated piercing connector on the market today, such as insulated piercing connector, insulated piercing ground connectors, 10kv insulated piercing connector, 1kv insulated piercing connector, insulated wire lightning insulated piercing connector and so on. So how can you choose the correct puncture wire clip you want?
First of all, we should choose the insulated piercing connector to meet the nominal range of the cable cross section. For example, the use range of the insulated piercing connector you want is 1KV or 10KV.
2. Second, the insulated piercing connector is selected from the structural aspect. This is to see the actual structure of the insulated piercing connector used, such as where it needs to be and what shape it needs to be. Because the cable should be clamped in the middle of the arc of the insulated piercing connector, the visual inspection should not be too high. In the wet cable well, it is strictly necessary to pay attention to the burr of the branch line fracture and not to pierce the end cap. In extremely humid environments, wrap the branch ends with heat-shrinkable insulated piercing connector or plastic tape before tightening the end caps.
When using a insulated piercing connector as a cable connection, it is strictly forbidden to bear radial tension. It is recommended to use two insulated piercing connectors at one continuous point to give radial tension to the cable. At this time, it should be noted that two end caps are used for one insulated piercing connector. When we choose a insulated piercing connector as ᱢᱤᱫ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮ, ᱵᱟᱱᱟᱨ ᱜᱮ ᱢᱮᱴᱨᱤᱠᱥ ᱨᱮᱭᱟᱜ ᱜᱚᱲᱦᱚᱱ ᱠᱷᱚᱱ 150 kPaps ᱠᱚ ᱛᱟᱞᱟ ᱨᱮ ᱢᱮᱱᱟᱜ-ᱟ᱾
