ᱡᱤᱱᱤᱥ ᱠᱚ
ᱵᱟᱹᱲᱛᱤ ᱵᱟᱰᱟᱭ ᱥᱟᱶ
- ᱚᱱᱰᱮ ᱫᱚ ᱭᱟᱢᱟᱦᱟ, ᱭᱟᱢᱟᱦᱟ, ᱭᱟᱢᱟᱦᱟ, ᱭᱟᱦᱩ, ᱭᱟᱦᱩ, ᱭᱟᱢᱟᱦᱟ ᱭᱟᱢᱟᱦᱟ ᱭᱟᱢᱟᱦᱟ ᱭᱟᱢᱟᱦᱟ ᱘᱙
- sales@cdpowerfitting.com
- +86-514-86978288
XALPA-ALT
The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning wire in position that does not bear tensile force and jumper wire connection in non-straight line pole tower.
ᱤᱱᱴᱮᱜᱽᱨᱮᱥᱚᱱ
ᱥᱚᱨᱥ:
The contact performance of the splicing connectors is related to the size of the contact resistance. The factors that affect the contact resistance are contact pressure, contact area and conductor material. The wedges of the upper and lower J elements are wedged into each other through the longitudinal tightening force of the bolts. After the installation is completed, the two J elements generate a transverse force on the conductor, causing the elastic deformation of the J element to act between the conductor and the wedge. Stable contact pressure between wedges. There is (multiple) point contact between the wire and the wedge, and there is surface contact between the wedges. The lateral friction when the wedge is wedged has a certain self-cleaning effect on the clamp itself and the conductor. These features ensure the connection performance of the J type pg ᱰᱤᱴᱮᱠᱴᱚᱨ {} }} |
ᱦᱚᱜᱽᱥ: ᱡᱟᱨᱢᱟᱱᱤ, ᱥᱯᱤᱠᱟᱨ, ᱥᱯᱤᱠᱟᱨ, ᱥᱯᱤᱠᱟᱨ, ᱵᱽᱨᱟᱱᱰᱤᱝ, ᱵᱮᱱᱟᱣᱤᱡ ᱠᱚ ᱦᱚᱛᱮᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ
ᱟᱢ ᱱᱚᱣᱟ ᱵᱟᱢ ᱠᱩᱥᱤᱭᱟᱜ-ᱟ
