ᱥᱞᱚᱴ ᱠᱚ ᱫᱚ ᱥᱟᱱᱟᱢ ᱠᱷᱚᱱ ᱵᱮᱥ ᱮᱞᱟᱨᱢ ᱠᱚᱰ ᱠᱚ ᱦᱚᱛᱮᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ ᱾

ᱥᱚᱨᱥ:

The tension clamp should bear all the pulling force of the wire or the lightning protection wire. The clamping force of the tension clamp is not less than 90% of the rated tensile strength of the installed wire or lightning protection wire, but it is not used as a conductor. This type of tension clamp can be removed after the wire is installed and used separately.

ᱤᱱᱴᱚᱨᱱᱮᱴ:

0.5 minogenes ᱫᱚ ᱢᱤᱫ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱡᱤᱱᱤᱥ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱟᱨ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱟᱨ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱡᱤᱱᱤᱥ ᱠᱚ ᱵᱚᱫᱚᱞ ᱠᱟᱛᱮ;

0.5 kmm ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱢᱟᱨᱥᱟᱞ, ᱞᱚᱞᱚ ᱦᱚᱭ ᱦᱤᱥᱤᱫ, ᱟᱨ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡᱚᱜ ᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱚᱫᱚᱞ ᱠᱚ ᱫᱚ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡᱚᱜ ᱠᱟᱱᱟ;

0.5 mg ᱠᱷᱚᱱ ᱞᱤᱠᱮᱡᱽ, ᱟᱨ ᱜᱞᱩᱠᱚᱡᱽ ᱟᱨ ᱢᱮᱠᱟᱱᱤᱠᱟᱞ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱜᱞᱩᱠᱚᱡᱽ ᱠᱷᱚᱱ ᱠᱚᱢ ᱠᱷᱚᱱ ᱠᱚᱢ ᱛᱮ ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱᱟ;

ᱜᱡᱚᱴᱱᱟ ᱫᱚ ᱟᱡ ᱛᱮ 5.0ms ᱨᱮᱭᱟᱜ ᱥᱟᱹᱨᱤ ᱜᱩᱱ ᱠᱚ ᱥᱟᱶ ᱡᱚᱲᱟᱣ ᱟᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱵᱟᱹᱲᱤᱡ ᱵᱟᱹᱲᱤᱡ ᱵᱟᱹᱲᱤᱡ ᱵᱟᱹᱲᱤᱡ ᱠᱚ ᱩᱫᱩᱜ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ;

0.05 ᱫᱚ ᱥᱟᱹᱨᱤ ᱜᱮ ᱢᱤᱫ ᱞᱮᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱵᱟᱝ ᱴᱷᱤᱠ ᱟᱨ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱟᱠᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ ᱠᱷᱚᱱ ᱵᱟᱝ ᱵᱟᱹᱲᱤᱡ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ;

{ } } } } , ᱟᱨ 1} ᱥᱴᱨᱳᱥ ᱞᱟᱹᱜᱤᱫ ᱟᱞᱜᱟ ᱜᱮᱭᱟ ᱾

ᱦᱚᱜᱽᱥ: ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱ, ᱵᱮᱱᱟᱣ ᱟᱠᱟᱱ, ᱜᱞᱮᱰ, ᱥᱠᱚᱞᱟᱨ, ᱠᱚᱠᱴᱮᱞ, ᱡᱟᱨᱢᱟᱱᱤ, ᱜᱞᱩᱠᱚᱡᱽ ᱠᱚ ᱫᱚ ᱱᱚᱶᱟ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ ᱢᱤᱫᱴᱟᱹᱝ ᱠᱟᱱᱟ ᱾